Model water
Aquafine is an optimal 2-component casting resin system for the realistic, absolutely prototypical representation of model water.
The container is pre-dosed with a deaerator and thus allows bubble-free results. The mixing ratio is 100: 60, is also pre-dosed and ready to use. Hardener and resin mix well and you're ready to go. The pot life is approx. 45 min., After approx. 24 hours the surface is dust-dry. Aquafine does not attack Styrofoam, Styrodur or similar materials and there is virtually no odor nuisance. Care must be taken to ensure a good seal and horizontal positioning of the substrate. A detailed user manual is enclosed.
Container made of hardener and resin.
Our tip: with color pigments you can "color" the model water and thus adjust the water color or opacity, depending on your own imagination.
The container is pre-dosed with a deaerator and thus allows bubble-free results. The mixing ratio is 100: 60, is also pre-dosed and ready to use. Hardener and resin mix well and you're ready to go. The pot life is approx. 45 min., After approx. 24 hours the surface is dust-dry. Aquafine does not attack Styrofoam, Styrodur or similar materials and there is virtually no odor nuisance. Care must be taken to ensure a good seal and horizontal positioning of the substrate. A detailed user manual is enclosed.
Container made of hardener and resin.
Our tip: with color pigments you can "color" the model water and thus adjust the water color or opacity, depending on your own imagination.
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login